HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

Strange PMP & Disk issue.

 
Stu Pittwood
Occasional Advisor

Strange PMP & Disk issue.

SIM 5.1 & PMP 4.3.

We have a couple of servers which have BF0728A4BA hard disks in them. When looking at System Management Homepage these disks are clearly identified as 15K U320 disks. When looking at the inventory in PMP these disks show up as SCSI1 disks of an unknown model, for us, this flags up a configuration error as PMP thinks that the array is made up of disks of different speeds.

The server is up to 7.70 on both PSP & Firmware.

Anyone else seen this? or have any ideas how to resolve this?

Thanks

Stu
1 REPLY
pkrai
Trusted Contributor

Re: Strange PMP & Disk issue.

Hi,

May be this hard disk is not supported by PMP & thus reported as Unknown Model.

Thanks.