System Management Homepage will not display

[Albert Austin]

In SMH, click on Settings tab and choose security. You should find a link name IP Binding.

Albert

[Christian Henderson]

I tried this, and it still goes to localhost:2381. Also, the management homepage is seperate from the insight manager homepage. Insight manager goes to localhost:50000 (by default). Is this suppost to change both homepages from localhost to binded IP?

CH

[Albert Austin]

Hi,

It would be a good idea to start a new thread and describe a bit more what problems you are facing.

Albert

[Russ_50]

I am seeing a simular problem on a few of my servers. Normally, one should be able to go to the address https://:2381 to get to the HP home page. For some reason this does not work. If you log onto the server, you can go to https://127.0.0.1:2381 and it works fine, but even from the RDP session, you cannot go to https://:2381 or https://:2381. I looked at this for quite a while today but could not figure it out. This is preventing Insight Manager from reporting the version control properly. Any ideas? My systems are running support pack 7.51a. Thanks.

[Rich Purvis]

Russ - You might check the security settings for the SMH. Are any of the IP Binding settings turned on? If you have IP binding turned on but no valid IP specified it will only talk through localhost/127.0.0.1.

-Rich