HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

Test Traps from SFM via SMH

 
scotted
Frequent Advisor

Test Traps from SFM via SMH

Does anyone know how I can send test traps to the CMS from SFM? I cannot seem to find a way via the SMH?
3 REPLIES
Rob Buxton
Honored Contributor

Re: Test Traps from SFM via SMH

Not sure what the SFM is. But, from a Windows Server if you fire up the HP Management Agents GUI from Control Panel there's a Send Trap option there.
It should generate a Major Event on HPSIM.
scotted
Frequent Advisor

Re: Test Traps from SFM via SMH

SFM is System Pault Management on HPUX systems. On Linux you send test traps from the SMH...can't seem to find a similar way on the SMH on HPUX.
Andrew Merritt_2
Honored Contributor

Re: Test Traps from SFM via SMH

Hi,
Which particular features of SFM are you wanting to test?

For the EMS wrappers, you should be able to generate test indications by using /etc/opt/resmon/lbin/send_test_event on the command line (e.g. "/etc/opt/resmon/lbin/send_test_event disk_em") to send a test EMS event, and that should show up in HP SIM under the Events tab on the System Page for the system, once you've configured it subscribe to WBEM events on that system.

Andrew