HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Server Management - Systems Insight Manager
Showing results for 
Search instead for 
Did you mean: 

Thermal Degredation not clearing


Thermal Degredation not clearing

I recently had a heat issue and a few DL360 G4's had thermal degredation alarms. The temp is now back below the threshold, but the phyisical red LED light on the front of the server isn't going away. I have even cleared the logs from the system's homepage. Any suggestions besides a reboot?
Rob Buxton
Honored Contributor

Re: Thermal Degredation not clearing

You may want to ask the question on one of the Server Forums as that is not really an HPSIM issue. You may get a better response.

The red LED would indicate something is still amiss. I wouldn't have thought a hard reset was required. If possible, you may want to open it up with the power and red LED still on as you can then view the internal status lights.