HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Server Management - Systems Insight Manager
Showing results for 
Search instead for 
Did you mean: 

Thermal Status OK

Go to solution
Occasional Advisor

Thermal Status OK

I have 2 NetWare servers that are sending alerts every couple of minutes to my HP SIM CMS server. The alert says "Thermal Status OK". If these alerts keep coming every few minutes my SIM database is going to grow very large. I have 40+ other NetWare servers that aren't sending that message repetitively.

Any ideas how I can get these 2 NetWare servers to stop sending this "Thermal Status OK" message over and over?

Thanks for your help..
Occasional Advisor

Re: Thermal Status OK

Can someone please help? These events are filling up the database..

Thank you..
Eugene Marko
Frequent Advisor

Re: Thermal Status OK


Dirty & quick method to filter out these messages:
Options -> Events -> SNMP Trap settings
And put
Enable Trap Handling: No
for desired event.
Then you'll have time to fix it from servers side and database will stop growing.

Anyway this is problem not of SIM server, but agent - you should look carefully on it's settings.

Eugene Marko.
Occasional Advisor

Re: Thermal Status OK

Thank you so much! I was able to temporarily turn off that alert so the database stops filling up.

Does anyone have any idea how to figure out why these 2 netware agents are sending this infomational message every few minutes?