Server Management - Systems Insight Manager
1752399 Members
5718 Online
108788 Solutions
New Discussion юеВ

Unable to Discover any systems - Sim 5 SP5

 
Steven_90
Occasional Contributor

Unable to Discover any systems - Sim 5 SP5

H E L P ! ! ! P L E A S E ! !

I'm unable to discover any systems either by Automatic or Manual discovery.

WBEM settings are ok, SNMP is setup ok. I've tried using Discovery filters and i've also tried it with the filter off completely.

I am attempting to discover HP servers across several subnets (routing is ok).

If I check the Audit logs it shows the following, but it does not add the system to the all systems list: -

1267: 2007-01-17 14:05:11 GMT,CONFIG,SUCCESS,RUN,DISCOVERY,Ping:172.nnn.nnn.nnn
GMT,CONFIG,SUCCESS,RUN,DISCOVERY,Ping:servername
9 REPLIES 9
NJK-Work
Honored Contributor

Re: Unable to Discover any systems - Sim 5 SP5

Can you manually add devices?
NJK-Work
Honored Contributor

Re: Unable to Discover any systems - Sim 5 SP5

Oops - sorry, did not fully read your post.
jesper lund
New Member

Re: Unable to Discover any systems - Sim 5 SP5


Try this:
Stop the HP SIM service
From a DOS box, run mxconfigrepo -f
Start HP SIM service

Then try the discovery again.
Steven_90
Occasional Contributor

Re: Unable to Discover any systems - Sim 5 SP5

Hi

I've now tried to MXConfigRepo -f but it's not fixed the problem.

We have now re-installed HP Sim 5.1 and SIM did start to discover devices and add them to the systems list but now it's stopped again.

Rob Buxton
Honored Contributor

Re: Unable to Discover any systems - Sim 5 SP5

Check the discovery filter settings, if they're enabled it may be that it has not recognised the device.
Disable them to start with and see if any devices are displayed.
Steven_90
Occasional Contributor

Re: Unable to Discover any systems - Sim 5 SP5

Hi

Thanks for the info. I'm not currently using the Discovery filters so that it should find everything.

I've been investigating further, if I run mxnode -lt, all the systems that i've tried to discover are showing in the list.

They do not show in the All Systems List.

Any ideas?
Stefan m├еhl
Occasional Advisor

Re: Unable to Discover any systems - Sim 5 SP5

Hi Steven
Sorry to say but...
I have the same problem as you.
The server won't show up in "All Systems" but it is listed when I run the command
mxnode.exe -lt.

Operating system: Windows 2003
Version: Systems Insight Manager 5.0 with SP4 - Windows
Build version: C.05.00.01.01

Have you find a workaround ?

Regards /Stefan

Raymond Yeung_2
New Member

Re: Unable to Discover any systems - Sim 5 SP5

I also have same symptom... Pls kindly advise what should i do?

Thanks
Raymond
Ryan Birk
New Member

Re: Unable to Discover any systems - Sim 5 SP5

I had issues just now with this. It was a database rights issue.