Unable to WBEM subscribe in HP SIM.

[Nirmal G]

Hi Team,

While running identify systems in HP SIM menu, getting the following message, I checked for all the credentials from Client side, WBEM crendential & WEBES's WBEM protocol. All are prefectly alright.

This system doesn't have a server CIMOM installed locally, or cannot connect to it using all credentials specified
Running WBEM rules based identification.

[Nirmal G]

Hi All,

Following is the full output of the System Indification.

Starting identification process...
Checking for known running web servers.
Checking for System Management Home Page and other HP web agents.
The System Management Homepage is not supported on this system.
Checking for WBEM support on system.
This system does not have any SMI-S CIMOM installed
This system doesn't have a server CIMOM installed locally, or cannot connect to it using all credentials specified
Running WBEM rules based identification.
Cannot get ComputerSystem WBEM/WMI data from the system
Running VM Identification.
The system is not a VM Host, or WBEM credentials may not be specified, skipping VM Identification
Running WS-Man identification.
The system did not respond to WS-Management, verify credentials.
Checking for SNMP support on system.
The system did not respond to SNMP, verify security settings and community strings.
Running SNMP base Cluster identification using common cluster MIB.
This was not a system with the common cluster MIBs supported.
Running HP ProLiant management agent identification
The system does not support SNMP.
Running HP NetServer identification.
The system does not support SNMP.
Running HP-UX SNMP identification.
The system does not support SNMP.
Running SNMP System Type Manager identification.

[Rob Buxton]

What kind of device is this?

[Rob Mills]

is WBEM showing up as a protocol on the System Information screen? If not, you either need to re-install the WBEM providers or make sure your username/password is correct in your global credentials. Also, I have seen cases where port 5989 is being used by something else.

[Nirmal G]

Hi Rob Buxton,
it is a (HP-UX)UNIX server

Hi Rob Mills,

I have tried reinstalling WBEM & SFM, but no luck. No ports are utlizised by any other process.