Server Management - Systems Insight Manager
1748181 Members
3551 Online
108759 Solutions
New Discussion юеВ

Re: Unable to clear the Integrated Management Log

 
Eric Williams_4
Advisor

Unable to clear the Integrated Management Log

I upgraded my client to the 7.1 PSP. And I can't clear the Integrated Management Log from previous alerts. I am logged in with administrator priveledges and SNMP sets are enabled.
7 REPLIES 7
Gordon Leonard
Honored Contributor

Re: Unable to clear the Integrated Management Log

Do you have a RW or RC SMNP string configured in the SNMP service?
OlivierV
Trusted Contributor

Re: Unable to clear the Integrated Management Log

We had the same issue on a server and it was resolved by upgrading the firmware of the Ilo. It was also impossible to clear the log using the GUI tool the HP tools.
Martin Modin
Advisor

Re: Unable to clear the Integrated Management Log

Eric did you ever find a solution for this? I have the same problem and I do not have any iLO card.
Eric Williams_4
Advisor

Re: Unable to clear the Integrated Management Log

Check to make sure that the SNMP trap settings are correct. The community string needs to be read write or read create. If it is read only, it will not work. Otherwise, depending on what version you are on, i would recommend upgrading the PSP to the latest version. But FYI, when upgrading PSP's, there will be a brief 1 or 2 second outage when it upgrades the NIC drivers.
Martin Modin
Advisor

Re: Unable to clear the Integrated Management Log

Thanks...
Someone had changed the settings to read.

Thank you very much.
Crashlanding
New Member

Re: Unable to clear the Integrated Management Log

For security reasons we do not use the RW or RC for SNMP.  Youcan go into the iLO and clear the Integrated Log as well as the iLO Log.

Andrew_Haak
Honored Contributor

Re: Unable to clear the Integrated Management Log