HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

Unable to see the events in SIM

 
Gokula
Occasional Advisor

Unable to see the events in SIM

When I tried to test the event handling function in SIM, by flapping a nic. I am unable to see the events in the SIM. However, when I used the snmputil.exe trap to see if the events are received by the SIM, Server was able to get that information. But doesn't reflect in the event trap.

 

C:\Users\Administrator\Desktop>Snmputil.exe trap
snmputil: listening for traps...
Incoming Trap:
  generic    = 6
  specific   = 18013
  enterprise = .iso.org.dod.internet.private.enterprises.232
  agent      = 10.1.10.55
  source IP  = 10.2.250.45
  community  = emspublic
  variable   = system.sysName.0
  value      = String msrvadm10
  variable   = .iso.org.dod.internet.private.enterprises.232.11.2.11.1.0
  value      = Integer32 0
  variable   = .iso.org.dod.internet.private.enterprises.232.18.2.3.1.1.5.2
  value      = Integer32 0
  variable   = .iso.org.dod.internet.private.enterprises.232.18.2.3.1.1.10.2
  value      = Integer32 2
  variable   = .iso.org.dod.internet.private.enterprises.232.2.2.4.17.0
  value      = String CPQ0762
  variable   = .iso.org.dod.internet.private.enterprises.232.18.2.3.1.1.14.2
  value      = Integer32 2
  variable   = .iso.org.dod.internet.private.enterprises.232.1.2.13.1.1.5.5.0
  value      = String HP NC373i Multifunction Gigabit Server Adapter
  variable   = .iso.org.dod.internet.private.enterprises.232.18.2.3.1.1.32.2
  value      = String
  variable   = ip.ipAddrTable.ipAddrEntry.ipAdEntAddr.10.2.250.45
  value      = IpAddress 10.2.250.45
  variable   = .iso.org.dod.internet.private.enterprises.232.18.2.4.1.1.6.2
  value      = String fe80::21b:78ff:fe9e:26b8/64
  variable   = .iso.org.dod.internet.private.enterprises.232.18.2.2.1.1.6.3
  value      = Integer32 2

 

 

1. I tried to clear the xml file in the <install Dir>/traps/*.xml  -> still the problem remains.

 

2 REPLIES
shocko
Honored Contributor

Re: Unable to see the events in SIM

What versions of the following are you using:

 

  • OS
  • SIM
  • Insight Management Agents

Is an event being raised in the evtn log when you flap the Nic? If so, then the agents look good. Check there are no disabled monitoring modules and the Network agents service is started. Also, run a network sniff to see if the trap is being sent.

If my post was helpful please award me Kudos! or Points :)
Gokula
Occasional Advisor

Re: Unable to see the events in SIM

1. OS - > Redhat linux
2. SIM - > 7.2 Windows Ed
3. PSP 9.1

Yes I see the an event raised , when I bring up the NIC. The event doesn't come when the NIC is taken down. The trap reaches the SIM server. But not displayed in the browser. I have set the SIM to accept traps from any where.