Server Management - Systems Insight Manager
1748030 Members
5338 Online
108757 Solutions
New Discussion юеВ

Re: Unable to upgrade Ilo4 firmware using HPSIM 7.5 April update

 
SOLVED
Go to solution
Jaydiohead1
Occasional Contributor

Unable to upgrade Ilo4 firmware using HPSIM 7.5 April update

Hello

 

When i try to upgrade my ilo4 board firmware, HPSUM hung when i try to deploy multiple firware or give me this message when i try to upgrade only one : 

 

////////////////////////////////////////////////////////////////////////////////
// HP Smart Update Manager for Node 10.219.62.50 Started: Wed Aug 31 2016 10:52:37
// HPSUM Version: 7.5.2."2".29645M.x64
////////////////////////////////////////////////////////////////////////////////
Inventory started
Inventory completed

Analysis started
Analysis completed

Analysis started
Analysis completed


Node 10.219.62.50 is up to date, no updates were needed or nothing was installed before exiting.

////////////////////////////////////////////////////////////////////////////////
// Exit Code for Node 10.219.62.50: 3
// HP Smart Update Manager for Node 10.219.62.50 Finished Wed Aug 31 2016 10:53:20
////////////////////////////////////////////////////////////////////////////////WINDOWS_HPSUM_INSTALL_NOTE,C:\cpqsystem\hp\log\10.219.62.50
HPSUM_LOG_INFO
HPSUM_DETAIL_INFO

 

 the target is using firmware 1.5 ...

I tried a manual upgrade after that to 2.42 with no issue

pb, i got 460 ilo4 to upgrade :(

2 REPLIES 2
Andrew_Haak
Honored Contributor
Solution

Re: Unable to upgrade Ilo4 firmware using HPSIM 7.5 April update

 Hello,

 

You should look for the HP  directory support tool, you can download it here http://h20566.www2.hpe.com/hpsc/swd/public/detail?sp4ts.oid=5194969&swItemId=MTX_a929473982c3438fbf79fdd19a&swEnvOid=4168

With this tool you can configure AD authentication, but one interesting option in this tool is to mass update ILO's.

Download your BIN files to update your ILO's place then on your server and start the tool. First you need to list thr ip or dns name of your ILO's or a whole subnet. Then enter credentials to be used to logon to your ILO's in the next screen you can flash your ILO's. Since there is no impact on flashing the ILO you can update all of them at once.

Kind regards,

Andrew
Jaydiohead1
Occasional Contributor

Re: Unable to upgrade Ilo4 firmware using HPSIM 7.5 April update

Wonderfull .... how wan i was able to miss this tool

So many thanks !!!

Do you know if something similar exists for C7000 Enclosure OA ?