Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

Unmanaged system type, WBEM problems and iLO in HP SIM5.2

 
Sapos
Occasional Contributor

Unmanaged system type, WBEM problems and iLO in HP SIM5.2

Hi!
I replace servers from hpSIM 5.0 to another CMS with hpSIM 5.2 and i have a some problems. After dyscovery server on HP SIM5.2 some servers define without WBEM, but in HPSIM 5.1 the same srver show WBEM in "Management protocols".
Also i have a problem with some iLO cards: after dyscovery iLO card in HPSIM 5.2 it's defined how unmamaged system. Some cards didn't associated with server. In HPSIM 5.0 with these iLO there are no problems.
Help me please!
Thanks!
4 REPLIES 4
Rob Buxton
Honored Contributor

Re: Unmanaged system type, WBEM problems and iLO in HP SIM5.2

You should still be able to identify servers and ILOs with just SNMP.
Unmanaged indicates HPSIM hasn't been able to access the device - so recheck snmp.

You'll need to get them identified before they'll get associated with their server.
Sapos
Occasional Contributor

Re: Unmanaged system type, WBEM problems and iLO in HP SIM5.2

1. iLO which not associated with server has a correct system type - "Managment processor".

2. Why some servers dyscovered without WBEM?
Rob Buxton
Honored Contributor

Re: Unmanaged system type, WBEM problems and iLO in HP SIM5.2

If a device is in a discovery range it can be discovered by just about anything, e.g. ping. But to identify it it needs a bit more and the simplest at the moment is snmp.
You can use WBEM for identification, but it's not the only thing you can use.

Try running an identification task on the ILO and its associated server at the same time. That sometimes works for me.
Highlighted
Sapos
Occasional Contributor

Re: Unmanaged system type, WBEM problems and iLO in HP SIM5.2

Problems with iLO was solved.