Updating Firmware in c-Class enclosure

[Aaron.S]

In one of out c-Class enclosures, the firmware updates were a breeze with the virtual connect manager.

This second enclosure I'm dealing with however, doesn't seem to use / have that functionality.

It contains 6x "Cisco Catalyst Blade Switch 3020 for HP". Each of these has a console port on the back.

I dont have a laptop, and all systems surrounding the enclosure are just more enclosures.

What's the best / easiest way for me to get at these devices to upgrade their firmware (which hasn't been done since they were first purchased).

Thank you so much,


-Aaron

[Aaron.S]

Is there some functionality with HPSIM that would do it?

Or a manner to use the enclosure link to get at the cisco's console port?

[JKytsi]

check this

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=3709945&prodSeriesId=1842750&prodNameId=3288156&swEnvOID=1005&swLang=8&mode=2&taskId=135&swItem=MTX-4d5bf90352b84c8d81c3e1d698