HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

Upgrading HPSIM 6.3 to HPSIM 6.3.1

 
corbyph
Occasional Visitor

Upgrading HPSIM 6.3 to HPSIM 6.3.1

I have HPSIM 6.3 installed on a Proliant BL460 G6 and I am trying to apply the HP Insight 6.3 incremental update.  However when I run the setup file it responds with a message stating that Insight Software 6.3 is not present on this machine.

 

Has anyone else come across this problem

 

 

7 REPLIES
RNa
Occasional Visitor

Re: Upgrading HPSIM 6.3 to HPSIM 6.3.1

When you open your SIM console and do Help>About what build version do you see?

corbyph
Occasional Visitor

Re: Upgrading HPSIM 6.3 to HPSIM 6.3.1

Central management server:      Hostname: UKSPMGT01      Operating system: Windows Server 2008 R2      Version: Systems Insight Manager 6.3 - Windows      Build version: C.06.03.00.00      Build date: 2011-03-28 22:02      Patches:

Mrpink200
Occasional Advisor

Re: Upgrading HPSIM 6.3 to HPSIM 6.3.1

same issue here :(

Typhoon87
Frequent Advisor

Re: Upgrading HPSIM 6.3 to HPSIM 6.3.1

I was having the same issue applying the .1 patch. The way I got it to install was to log onto the server as the local administrator. Even though my network account is an admin and my network account was used for the original installation the patch would not install. I log in as a local machine account administrator works fine first try.

shocko
Honored Contributor

Re: Upgrading HPSIM 6.3 to HPSIM 6.3.1

Well, do you have IC installed or just SIM? Even if just installing SIM 6.x on a system you should install it through the Insight Control integrated installer and not by browsing directly to the HPSIM installer ;)

If my post was helpful please award me Kudos! or Points :)
Mrpink200
Occasional Advisor

Re: Upgrading HPSIM 6.3 to HPSIM 6.3.1

Sim have been installed from scratch using : SIM_6.3_Z7550_00079.exe

shocko
Honored Contributor

Re: Upgrading HPSIM 6.3 to HPSIM 6.3.1

I would install through the IC installer.

If my post was helpful please award me Kudos! or Points :)