Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

VCA Reports Wrong Version of iLO Firmware

SOLVED
Go to solution
Andrew Schlafmann
Frequent Advisor

VCA Reports Wrong Version of iLO Firmware

I have a DL360G5 with iLO firmware version 1.70 (Attachment). Installed version shows as 1.50 in VCA. Tried resetting iLO, re-installing VCA, restarting server, and restarting the management agents. Is there anything else I can try?
7 REPLIES
Rob Buxton
Honored Contributor

Re: VCA Reports Wrong Version of iLO Firmware

I've seen this if you have the Remote Insight Agent removed. Check under Control Panel, HP Management Agents GUI. Sometimes this is removed if the ILO isn't actually being used - stops the reporting of the missing link.

To fix just put it back in, rerun the SW polling task and then remove it again.
Andrew Schlafmann
Frequent Advisor

Re: VCA Reports Wrong Version of iLO Firmware

The Remote Insight Agents are enabled. I had read that too, where if you had them disabled it wouldn't update.
sandeep_raman
Honored Contributor
Solution

Re: VCA Reports Wrong Version of iLO Firmware

Restart the Remote Insight Agents
Andrew Schlafmann
Frequent Advisor

Re: VCA Reports Wrong Version of iLO Firmware

Is that in the HP Management Agents applet in Control Panel?
sandeep_raman
Honored Contributor

Re: VCA Reports Wrong Version of iLO Firmware

yes
Andrew Schlafmann
Frequent Advisor

Re: VCA Reports Wrong Version of iLO Firmware

Done. It still didn't change anything though.
Andrew Schlafmann
Frequent Advisor

Re: VCA Reports Wrong Version of iLO Firmware

Restarted ALL HP agents and it was fixed. Thanks.