Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

VCRM invalid or not reachable from all VCA's

NickPrice
Occasional Visitor

VCRM invalid or not reachable from all VCA's

I have 5 DL360P servers all on the same subnet

192.168.2.10 has vca ver. 7.3.5, vcrm 7.6 and system management homepage 7.6

The vca can only connect to vcrm if i configure it for localhost.

on the other servers if i configure the vca to go to 192.168.2.10 for the vcrm i get the error VCRM invalid or not reachable.

I ran wireshark packet capture on the server the vca doesnt even go an look at 192.168.2.10 no packets sent.

I also disabled the firewall on all servers this didn't help.

any ideas please i dont want to have to load vcrm on all servers

 

 

 

 

1 REPLY
Andrew_Haak
Honored Contributor

Re: VCRM invalid or not reachable from all VCA's

Hello,

 

Why don't you use the HP SUM to remotly update one or more server(s) ?

HP VCRM is no longer the recomended way to update your server(s).

Kind regards,

Andrew