HPE Community
Server Management - Systems Insight Manager
1753883 Members
7720 Online
108809 Solutions
New Discussion юеВ

VCRM not showing up- but its installed and running

 
John Vojtech
Occasional Contributor

тАО06-07-2006 07:35 AM

тАО06-07-2006 07:35 AM

VCRM not showing up- but its installed and running

I installed VCRM on the Insight Manager server and another server. The Insight Manager server never showed the VCRM being installed in SIM. But when I installed it on a different server, SIM detected it and it worked fine for months. recently SIM doesnt show the VCRM installed and all the servers cannot contact the repository. Are certain ports needed to be open for SIM to see VCRM or a snmp setting?
0 Kudos
Reply
2 REPLIES 2
Rich Purvis
Honored Contributor

тАО06-07-2006 02:13 PM

тАО06-07-2006 02:13 PM

Re: VCRM not showing up- but its installed and running

Well for HPSIM to see the VCRM ports 2301/2381 have to be working on the system running VCRM. Those are the System Management Homepage ports. If HPSIM no longer "sees" an active VCRM you might try running an Identify task against the server running VCRM and see if HPSIM recognizes it again.

-Rich
Why does my tivo keep recording Nickelodeon?
0 Kudos
Reply
John Vojtech
Occasional Contributor

тАО06-08-2006 12:23 AM

тАО06-08-2006 12:23 AM

Re: VCRM not showing up- but its installed and running

I have run the Identify systems. I will check to see if the ports are open.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.