HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

VCRM not showing up- but its installed and running

 
John Vojtech
Occasional Visitor

VCRM not showing up- but its installed and running

I installed VCRM on the Insight Manager server and another server. The Insight Manager server never showed the VCRM being installed in SIM. But when I installed it on a different server, SIM detected it and it worked fine for months. recently SIM doesnt show the VCRM installed and all the servers cannot contact the repository. Are certain ports needed to be open for SIM to see VCRM or a snmp setting?
2 REPLIES
Rich Purvis
Honored Contributor

Re: VCRM not showing up- but its installed and running

Well for HPSIM to see the VCRM ports 2301/2381 have to be working on the system running VCRM. Those are the System Management Homepage ports. If HPSIM no longer "sees" an active VCRM you might try running an Identify task against the server running VCRM and see if HPSIM recognizes it again.

-Rich
Why does my tivo keep recording Nickelodeon?
John Vojtech
Occasional Visitor

Re: VCRM not showing up- but its installed and running

I have run the Identify systems. I will check to see if the ports are open.