Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

VMM service failes to start

Bart Korsten
Occasional Advisor

VMM service failes to start

This is from the vmm 2.1 logfile on the CMS server :

2007/03/18 14:16:15 | INFO - SIM SOAP access failed.
2007/03/18 14:16:15 | WARN - Waiting 30 seconds until retrying to contact SIM.
2007/03/18 14:16:45 | ERROR - Failed to contact SIM SOAP service for 30 minutes. Stopping service.
2007/03/18 14:16:45 | Failed to contact SIM SOAP service for 30 minutes. Stopping service.

2 REPLIES
Bart Korsten
Occasional Advisor

Re: VMM service failes to start

The microsoft iscsi driver was not installed. Downloaded it from the Microsoft website (2.0.3).

Problem reserviced after a reboot. The logfile again reports :

2007/03/20 07:34:08 | INFO - Not binding factory to JNDI, no JNDI name configured
2007/03/20 07:34:08 | INFO - starting update timestamps cache at region: net.sf.hibernate.cache.UpdateTimestampsCache
2007/03/20 07:34:08 | INFO - starting query cache at region: net.sf.hibernate.cache.StandardQueryCache
2007/03/20 07:34:08 | INFO - Enable multi home support: "145.58.2.123"
2007/03/20 07:34:08 | INFO - SSLSupport initialized with keyStore=/vmtools.ks trustStore=/vmtoolstrust.ks
2007/03/20 07:34:09 | INFO - SIM SOAP access failed.
2007/03/20 07:34:09 | WARN - Waiting 30 seconds until retrying to contact SIM.

iscsi driver is loaded OK
Bart Korsten
Occasional Advisor

Re: VMM service failes to start

This problom is solved. When I install a certificate from one of our internal CA's the VMM service will no longer funtion. The creation of a new certificate on the CMS and a retart of the SIM service in enough to get the VMM service working again.