Version Control Agent List for All Servers

[Dominique_10]

Hello,

I am looking for a comprehensive list of "Version Control Agent" software.

I am trying to bring up-to-date the software but apparently there are so many versions with incompatibilies with Operating Systems, Platforms, Hardware it is a labyrinth with no end.

Operating Systems:

- Windows Server 2003 32-bits

- Windows Server 2003 64-bits

- Windows Server 2008 32-bits

- Windows Server 2008 64-bits

Hardware:

- Proliant BL

- Proliant DL

- Proliant ML

from 360-38- etc G1 through G8...

Any extensive list on HP site?

Thanks,

Dom

[lakshmana1]

Here are the VCA links

Windows X86 - http://h20566.www2.hpe.com/hpsc/swd/public/detail?swItemId=MTX_676ddad17a06423589ee8889d0

Windows X64 - http://h20564.www2.hpe.com/hpsc/swd/public/detail?sp4ts.oid=5177951&swItemId=MTX_72d53359c85340f899e81986a7&lang=en-us&cc=us&swEnvOid=4064

[Dominique_10]

Hello,

Unfortunately these versions are failing...

Windows Server 2003 Service Pack 2 x86

Proliant DL360 G5

Faulting application cp026910.exe, version 7.3.5.0, faulting module cp026910.exe, version 7.3.5.0, fault address 0x0000229b.

Faulting application cpqsetup.exe, version 2.6.0.0, faulting module vcasetup.dll, version 7.3.5.0, fault address 0x0007e5f7.

Any idea why?

Thanks,

Dom

[Andrew_Haak]

Hello,

Did you try to rename the .exe to .zip and see if you can unzip the file?

i've downloaded both installers and they worked just fine. I sometimes see that the download breaks before completing. Is the size of the download correct according to the info on the download page?

[Dominique_10]

Hello,

I am trying to upgrade the HP System Homepage with the latest version provided by HP.

Server Windows Server 2003

HP System Management Homepage 7.2.5.3

After the upgrade the service will never start giving an error:

Event Type:	Error
Event Source:	Application Error
Event Category:	(100)
Event ID:	1000
Date:		8/31/2015
Time:		8:01:53 AMUser:		N/AComputer:	Server Name
Description:
Faulting application smhstart.exe, version 7.2.5.3, faulting module ntdll.dll, version 5.2.3790.5583, fault address 0x0004cca2.

What is the root cause of this issue? What could be done to resolve it?

It seems to get the same kind of issue..

Thanks,

Dom

[Andrew_Haak]

Hello did you uninstall any old version reboot and run the installer again?