Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

Version Control Respository Manager - "The specified repository is invalid or not reachable"

DenverM
Occasional Contributor

Version Control Respository Manager - "The specified repository is invalid or not reachable"

I've been racking my brain on this one.  I set up VCRM on a server a few months ago and was getting "The specified repository, [server], is invalid or not reachable".  After a couple of months of research, I find a post that suggests doing these command lines:

 

C:\HP\hpsmh\bin>smhconfig.exe -Z ALL:!ADH:!EXPORT56:!EXPORT40:DES-CBC3-SHA:RC4-MD5:RC4-SHA:RC4+RSA:+HIGH:+MEDIUM:-SSLv2:+EXP:!LOW:!eNULL:!aNULL

C:\HP\hpsmh\bin>smhconfig.exe -r

 

At first, this didn't seem to work.  Then one day it did and the server was working fine for a few months.  Now I'm getting the same error message.  The above fix does not work. 

 

Tried installing on different servers, no luck.  Checked firewall, no change.  Tried IP and fqdn.  Made sure have latest SMH and VCRM.

 

Any ideas?

 

Thanks 

 

 

P.S. This thread has been moved from ProLiant Servers (ML,DL,SL) to ITRC HP Systems Insight Manager Forum. - Hp Forum moderator

1 REPLY
Andrew_Haak
Honored Contributor

Re: Version Control Respository Manager - "The specified repository is invalid or not reachable

Hello,

You should install the latest VCA to connect to the VCRM. This because of the encription problems between the older VCA and the between SMH. VCA first connect to the VCRM trough the SMH of the server it wants to get the baseline from.
Kind regards,

Andrew