Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

WMI mapper proxy configuration

Robert Luessi
Frequent Advisor

WMI mapper proxy configuration

I want to use the WMI mapper to manage Windows hosts behind a firewall, but on a different Ports then the default that uses port 5989. Which configurations have to be changed on the CMS and on the Proxy System behind the firewall, that the WMI mapper still works?
4 REPLIES
ramesh_naik_
Esteemed Contributor

Re: WMI mapper proxy configuration

Hi Robert,

Not sure whether you are looking for the same thing that I am looking into!!!!!

Please check the page 430 and 431 in case you have not referred:
http://h10018.www1.hp.com:80/wwsolutions/misc/hpsim-helpfiles/hpsim_userGuide.pdf

Regards,
rmn
Robert Luessi
Frequent Advisor

Re: WMI mapper proxy configuration

Thanks,
Did you ever configured a different Port on a WMI Mapper proxy?
Do I need to configure something on the WMI client side?
Documentation only says:
In the Port number field, enter a port number. The WMI Mapper Proxy uses this port number to communicate with the WMI client.
ramesh_naik_
Esteemed Contributor

Re: WMI mapper proxy configuration

Hi Robert,

Was just going through this document called "Managing HP servers through firewalls with HP SIM 5.0 " here:
http://h18013.www1.hp.com/products/servers/management/hpsim/infolibrary.html?jumpid=reg_R1002_USEN#b3

It gives information about WMI mapper through firewalls
See if this helps you.....

Regards,
rmn
Robert Luessi
Frequent Advisor

Re: WMI mapper proxy configuration

Used default https port 5989. we had to open the firewall in and outbound onthis port.