What Ports to Open on Firewall

[equestrian]

Hello,

We have setup a HPSM 7.2 CMS on Windows VM (OS - 2012). This CMS is in NATed infra zone.

I've gone through Installation guide and found a list of ports/protocols there that should be open on Windows firewall at Os level. So we have diabled Windows Firewall feature/service.

I would request to please let me know what all ports should we open/allow on LAN Firewall so that HPSIM works correctly. So far, it is not even discovering itself and VCRM is not available.

Any information would be greatly appriciable.

Thank you,

[Michael Leu]

Have a look at the A.05.80 HP Insight Remote Support Advanced and Remote Device Access Security Overview . There is a good picture in the chapter "Architectural Overview" on page 13.

[SwisspostIT]

Hi,

following white paper shows a good table on page 12:

http://www.hp.com/wwsolutions/misc/downloads/management/hpsim/HPSIM_Security_WP.pdf

Regards,

Ville