cannot logon to HP System Management Homepage v2.0.1.104

[CA1311634]

The thread has been going for some time with no answer.

Please HP give one

[CA1312625]

Hi,

I've read your problem. I did have contact with HP. There is a link (http://docs.hp.com/en/5991-0710/ch13s01.html ) for the doc's but this is only if your server is NOT a DC! For the DC's you will have to wait for about a month, then version 7.30 will come and it should have solved the problem.

This also goes for insight manager from HP.

Good Luck!

|Bas|

[Matt Schneider]

Thanks Bastiaan. Hopefully it wont be too long for the update.

[Joey Albert]

I had the same problem and resolved it.

Use the login:

[DOMAIN_NAME}\Administrator (no \\ or extra slashes.

For example:

If your domain is MYDOMAIN and the Adminstrator account is ADMINISTRATOR:

Login:

MYDOMAIN\ADMINISTRATOR

and for the password, put the Administrator's password for the domain.

It works PERFECTLY for me!

[CA1346288]

Have DC and, regardless of username format, I'm getting the login failed.

Tried:
administrator
domain/administrator
administrator@domain.local

Painful

[Andrew Booker_1]

i tried mydomain\administrator used domain admin account password - IT WORKS !! - thanks very much for your reply

Andrew

[Nick Veryasov]

Thanks to Joey Albert! His approach works just fine -

MYDOMAIN\ADMINISTRATOR

and for the password, put the Administrator's password for the domain.


Nick

[mike taylor]

Using the MYDOMAIN\USERNAME scenario worked a treat.

Thanks saved a lot of messing about

[L W]

Works fine for me, thanks!

[Mark Klaassen]

Hi, I had the same problem after installing SBS 2003 R2 on a proliant ML350 server. After some attempts i have found the mistake I made was that I entered the full domain name(i.e mydomainname.local\administrator).

The solution for me was to get rid of the .local part of my domain name (i.e. mydomainname\administrator).

I hope this helps.

Mark