HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

change SNMP port on PSP 7.4

 
Tal Moran
Advisor

change SNMP port on PSP 7.4

Hello,

Is it possible to configure the port on which the various HP agents send SNMP alarms on, The default port is 162, can it be changed ? If yes can you send me the instructions?

The platform we use is RedHat Linux 3.0
The PSP versions use is 7.4
I tried to change the port number on the /etc/snmp/snmpd.conf (trapsink ) but the HP agents doesn't care for this change, although other traps sent on top of the SNMP daemon are sent on this new port

Thanks,
Tal.

 

 

 

P.S. This thread has been moved from ITRC server mgmt (Insight Manager 7) Forum to ITRC HP Systems Insight Manager Forum - HP Forums Moderator

2 REPLIES
Tal Moran
Advisor

Re: change SNMP port on PSP 7.4

This waht I get from HP:

Based on the SNMP implementation in Agents, the SNMP TRAP PORT is hard coded to 162 which is

not configurable by the user.

Even the iLO/RILOE-II SNMP implementation has SNMP TRAP PORT value of 162 which is

not configurable
Tal Moran
Advisor

Re: change SNMP port on PSP 7.4

Based on the SNMP implementation in Agents, the SNMP TRAP PORT is hard coded to 162 which is

not configurable by the user.

Even the iLO/RILOE-II SNMP implementation has SNMP TRAP PORT value of 162 which is

not configurable