HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

cma.conf question

 
SOLVED
Go to solution

cma.conf question

Hello

Apologies if this is the wrong sub forum to discuss the management agent but it seemed the most appropriate.

We are in the proccess of upgrading from ESX 3.5u4 with Agent 8.2.0. to ESX 4.0u2 Agent 8.3.1 for 4.0

In the past in order to avoid LUN locking and other nasty issues I have had to edit /opt/compaq/cma.conf and add the following lines to disable the Fibre Channel Agent etc.

exclude cmahost cmahostd cpqasm cmhp cmafcad

http://kb.vmware.com/kb/1004771

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c01519875&jumpid=reg_R1002_USEN%20

One of my colleuges has setup a test environment and it seems this path no longer exists.

Can anyone advise me please on how this can be done?

Thanks


Doug



2 REPLIES
Solution

Re: cma.conf question

new agents have a different location

/opt/hp/hp-snmp-agents/cma.conf is the new location for the agents configuration and the exclution procedure is exactly the same as you mention above.... keep in mind you nee to restart the agents by etc/init.d/hp-snmp-agents restart.

hope this help!

Re: cma.conf question

Excellent thank you, points assigned! :)