HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

disk broke on ibm server

 
SOLVED
Go to solution
luca1
Frequent Advisor

disk broke on ibm server

Hi,
I installed sim 6.3 for manage HP server. In my network I have also some IBM server (X3650, X3400 and DS3400 storage).
When I discover IBM server I read in system type "unknown" and read green box only for HS field.
How I must discover IBM server and storage. I will use sim main for detect disk broke, power supply broke and memory broke. On the IBM server I configured (as on hp server) comunity and snmp settings on snmp services.

Thanks

Jonh

5 REPLIES
J_N_Rhodes
Valued Contributor

Re: disk broke on ibm server

Did you get to know something on this?

shocko
Honored Contributor
Solution

Re: disk broke on ibm server

You would need MIBS imported into SIM for the IBM server and also some agents/method on that server to send traps when a hardware error is encountered.

If my post was helpful please award me Kudos! or Points :)
J_N_Rhodes
Valued Contributor

Re: disk broke on ibm server

I guess, HP SIM is recommended for "HP devices" ONLY?
Does HP SIM works in the same fashion(Functionality wise & data collected from managed system) for Non-HP devices also?
shocko
Honored Contributor

Re: disk broke on ibm server

Again, depends on whether you can get the MIBS into SIM and agents on the server to send traps. traps are sent with just the SNMP OID in them so the MIBS decode these into a meaningful alerts at the SIM end.

If my post was helpful please award me Kudos! or Points :)
luca1
Frequent Advisor

Re: disk broke on ibm server

Thanks for your support!