Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

how to monitor HP Servers behind NAT device using HPSIM?

hpvng
Occasional Contributor

how to monitor HP Servers behind NAT device using HPSIM?

Hi all,

I'm using net-snmp agents with snmp-proxy feature for forwarding OID inside a NAT device to a public HPSIM server. But HPSIM not support to inventory all devices behind the NAT device. Is there any proxy agent for hpsim? Note: Only use Linux system with SNMP (not using WMI)

1 REPLY
Andrew_Haak
Honored Contributor

Re: how to monitor HP Servers behind NAT device using HPSIM?

Hello,

 

No not that i'm aware of, you could install a VM SIM setup in the NAT subnet and let it forward event to the other SIm server. It depends on the number of servers in the NAT range if would want to do that.

Kind regards,

Andrew