how to stop error messages from power enclosure?

[Rainer Mittenzwey_2]

Hi,
we have a p.class rack, with power supplies, every 20 min i get the error:
Rack power supply input voltage problem (22019)
and
Rack power supply degraded (22014)
from th eenclosure.

Is there a way to stop this?

Regards Rainer

[Kenneth Pinson · Accepted solution]

If your goal is to just suppress the events, you will need to create an event filter to automatically handle the event. Go to Options > Events > Automatic Event Handling > Manage Events and create a new event.

[Rainer Mittenzwey_2]

that seems to be a good idea,
i tried deleting the servers from the rack enclosure to be able to delete the rack itself, but this is not possible, because one of the blade servers is the SIM server himself and therefore not deletable.

So i have to create rules.

[Terence Tsao]

If all hardwares status are good, you can upgrade server/power management module firmware to 2.40

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=1121598&prodNameId=3288176&swEnvOID=1005&swLang=8&mode=2&taskId=135&swItem=MTX-e25b66dcc42a4b798fc4a7ddaa

[Rainer Mittenzwey_2]

Terence,

that really did it!

Problem is solved now.

Regards
rainer

[Maartendw]

Hello all,

We have the same problem on one of our power enclosures. Powering BL25P blades.
The power enclosure is running for the moment firmware 2.30.

I tried changing the powersupplies and switching places.

[Maartendw]

Hello,
I've updated firmware of the enclosures to 2.40.

The false error messages are gone.
Update ran without any interruption.

Kind Regards,
Maarten