HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

hpdiags/diagnose problem

 
Peter_505
Advisor

hpdiags/diagnose problem

I log into SMH, go into HP Insight Diagnostics and click on the Diagnose tab

What is displayed under the Smart Array Drive Diagnosis is:

"System does not have any diagnosable devices installed"

Also in the Log I see under Device, test:
"libtcstorage.so ID Driver Open Failed in GetConfiguration"

The configuration is:

DL380 G4 SAS, OS: RHEL 5 U1
HP versions:
cmanic-7.9.0-5.rhel5
cpqacuxe-7.85-18
hpacucli-7.85-18
hpadu-7.85-16
hpasm-7.9.1-13.rhel5
hpdiags-7.9.1-15
hpsmh-2.1.10-186

The Array Configuration utility reports both P600 controllers and associated SAS drives, the Array Diagnostics Report also shows the P600 and disks.

Tried removing and reinstalling hpdiags, no help, tried dropping back one version of hpdiags but doesn't make a difference.

What can I do so I can once again run the Diagnose function?

~peter

 

 

P.S.This thread has been moved from  ITRC server mgmt (Insight Manager 7) Forum to ITRC HP Systems Insight Manager Forum- HP Forums Moderator

1 REPLY
Peter_505
Advisor

Re: hpdiags/diagnose problem

Update:

Called tech support, the 7.9.1-15 version is not supported under RHEL 5 U1. In fact none of the versions I listed in the original post are supported.....

They have no idea when supported versions will be released.

Here are the problems I've encountered to date:

1. Cannot run insight diagnostics/diagnose
2. Cannot view IML log
3. The survey report shows no controllers, no disks

~peter