HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Server Management - Systems Insight Manager
Showing results for 
Search instead for 
Did you mean: 

iLO snmp pass-thru for firewalled hosts


iLO snmp pass-thru for firewalled hosts


Following the guide "Managing HP servers through firewalls with Insight Software" I enabled SNMP pass-thru on the ILO and (from the guide, case 2 separate management network section):


For best protection of the servers operating inside the DMZ, administrators should set the SNMP trap
destinations to the loop back address and enable the SNMP pass-through in iLO 2 so that SNMP

traps are routed onto the iLO management network


But I never see a trap coming back...testing with:


snmptrap -v 1 -c public localhost NET-SNMP-EXAMPLES-MIB::netSnmpExampleNotification "" 6 17 "" netSnmpExampleInteger i 123456


or other community strings like allowhpsubagents or my private one, no traps are forwarded.


Looking at the network listeners, there is no process listening on UDP 162 (snmptrap) so I can't see how this "set trap destinations to localhost" would work.


of course the SIM identify fails totally as no SNMP responses are received...


Anyone got this working? O/S is Solaris but logic should be the same anywhere...