japanese in Version Control on English server.

[PeterN_UA]

Hi !

I get Japanese in VC after my ILO cards, this looks the same on all servers.

This is not normal or is it ?
what can be done to fix issue ( attached picture) ?
/ Peter

[Mikael Rönnbäck]

I've seen this too, unsure of whether HP made some mistake or if it's just a typo.

Anyway the situation comes from the fact that there are two different EXE-files for ILO firmware version 1.84

The older one, CP006487.exe contains ILO 1.84 and the newer one CP006581.exe contains "1.84 japanese".

I've installed the so-called japanese version on a test server the ILO functions are still in english. If you're unsure, it may be better to stick with the older exe-file until they release the next version.

[Niclas Larsson_2 · Accepted solution]

Hi

This seems to be an old problem reoccuring...
I solved this once by deleting
the Japanese version from the repository
(using HP Version Control Repository Manager) and rebuilding the respository.
Also see
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1036334

/Niclas

[PeterN_UA]

remove of japanese firmware from repository solved problem, THX !

/ PeterN

[Rene Nascimento]

I've removed the Japanese files and rebuilt the repository but the Japanese version comes back again after an HP repository download. How can I make the fix permanent?

[PeterN_UA]

I have removed the Japanese versions of PSP that came with the installtion, if you have japanese baselines , remove them .

It should hopfully not be downloaded again.
/ PeterN

[Rene Nascimento]

Thanks Peter, I removed the Japanese PSP's as well and the HP repository pull didn't bring it back again.