Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

system management homepage no items impossible d'installer HPE Insight Management WBEM Providers

 
Highlighted
aitrpro
Occasional Visitor

system management homepage no items impossible d'installer HPE Insight Management WBEM Providers

la page affiche "no items" pour regler le probleme il indique d'installer les elemment suivant :

HPE Insight Management WBEM Providers and/or HPE Insight management Agents

mais il est impossible de les installer, je suis sous windows serve 2016

 

Google Translated

the page displays "no items" to fix the problem it indicates to install the following ones:

HPE Insight Management WBEM Providers and / or HPE Insight Management Agents

but it is impossible to install them, I am under windows serve 2016

2 REPLIES 2
Suman_1978
HPE Pro

Re: system management homepage no items impossible d'installer HPE Insight Management WBEM Providers

Hi,

Have you tried these?

https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_8deb11de54ea4d1fb702029745
https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_606fc6aeafdc4e5aa0bef249a7


Thank You!
I am an HPE Employee

Was the post useful? Click on the white KUDOS! Thumb below.  Kudos is a way of saying thank you to a post.
Useful Links for ProLiant Servers


I work for HPE

Accept or Kudo

Highlighted
asyed01
Advisor

Re: system management homepage no items impossible d'installer HPE Insight Management WBEM Providers

Hi 

System management homepage uses one of 2 X protocols to populate all the information in SMH.

So you need to either use SNMP or WBEM

If you select SNMP from SMH settings then you need to install the below management agents

https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_8deb11de54ea4d1fb702029745

If you select WBEM as a protocol from SMH settings then you need to install using below link

https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_606fc6aeafdc4e5aa0bef249a7

 

+++++++++++++++++++++++++++++

If you select SNMP then you need to configure settings under snmp
How to congifure
From Windows select > snmp services >Right click SNMP services > Select properties
Now on the top select tabs "Security" > configure "public" as read community and "private" as write community.
Similary select the tab "traps" > configure "public" as read community and "private" as write community.

Now come back to SMH and select SNMP protocol under settings evrything will be populated in SMH

If you are planning to select WBEM you dont have to configure any settings
just install the package and all will be configured.

 

I am a HPE Employee