Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

trying to get System Management HP running on ML 350G4p and SLES 10

 
Highlighted
blentes
Frequent Advisor

trying to get System Management HP running on ML 350G4p and SLES 10

Hi,
i know these are old systems but they are still running fine. I had SMHP running on two systems, but without knowing why they don't work anymore. I have a ML 350 G5 with SLES 10 and on it SMHP is running fine.
On this system i have the following packages installed:
pc53200:~/compaq/csp/linux # rpm -qa|grep -i ^hp
hpsim-C.05.01.00.00-1
hplip-hpijs-0.9.7-19.9
hpsmh-3.0.2-77
hp-OpenIPMI-8.3.1-11.sles10
hpadu-8.26-1
hp-snmp-agents-8.3.0.27-17
hpvca-2.2.1-3
hpsim-pgsql-config-C.05.01.00.00-1
hp-health-8.3.1.2-12
hp-smh-templates-8.3.0.9-13
hpdiags-8.3.1-105
hp-ilo-8.3.1-11.sles10
hpacucli-8.30-5.0
hponcfg-4.3.0-0
hpmouse-1.1.2-33
I installed the same packages on the ML 350 G4p, but i get timeouts in SMHP and don't see the hardware in the browser. And i don't see "SNMP" in "Data source", which i think is an indication that everything is fine if it would be available. I installed the most recent versions of SMHP for the ML 350G4p (7.5.4-3), but starting it i get an error:
pc52842:~/hp_tools # /etc/init.d/hpsmhd start
Starting hpsmhd ...startproc: signal catched /opt/hp/hpsmh/sbin/smhstart: Floating point exception

And i would really like to know which additional packages i need for SMHP and integration in SIM. hpasm, hprsm, hp-health, hp-snmp-agents ... ? I'm totally confused of all the packages. 
I installed the most recent versions of hp-healt and hp-snmp-agents, but still don't succeed.
But installing the snmp-agents, i found some interesting output from rpm:
Following environment variables were used to configure snmpd/agents:
CMASKIPSNMPCONFIG
CMALOCALHOSTRWCOMMSTR
CMALOCALHOSTROCOMMSTR
What is the value of these variables respectively how do i have to set the readonly and the readwrite community strings for SMHP on the host ?
Currently i have the following packages o the ML 350 G4p:
pc52842:/opt/hp/hpsmh # rpm -qa|grep -i ^hp
hp-health-8.5.0.23-22
hplip-hpijs-0.9.7-19.9
hponcfg-1.6.0-1
hpsmh-3.0.2-77
hp-pel-1.0.1-1.sles10
hpadu-7.80-6
hp-snmp-agents-8.5.0.17-18
hpacucli-7.80-6
hp-smh-templates-8.5.0.13-15

Thanks in advance.

Bernd