530SFP+ onboard network adapter connectivity issue

[yaro137]

I have a Gen9 server with 10Gb 530SFP+ adapters. When one of the ports gets connected to to it's corresponding switch port the switch port receives MAC address diferent to what I can see in the iLO. This is in turn cousing some issues when trying to add this adapter port to a bond. I found in the BIOS that indeed this port has 2 MAC addresses one described as Permanent and one iSCSI. How can I disable the iSCSI one so the switch port doesn't get confused?

[ajav01]

hi , 

follow the procedure to enable / disable iSCSI in Gen9 Servers. if the issue persists.

https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c05088208&docLocale=en_US

log a case with HPE support 

[yaro137]

I'm not using UEFI. Still in RBSU>Network Options I don't have any adapters Listed as FlexibleLom.