Servers - General
cancel
Showing results for 
Search instead for 
Did you mean: 

AF401A & Power Monitoring

 
scott bates_1
Occasional Visitor

AF401A & Power Monitoring

I am using third party SNMP software (Kepware) to interface to several UPS's with AF401A Management Modules. I can get SNMP trap data fine but am having trouble getting some SNMP power information (eg : upsOutputVoltage). I have used the cpqpower.mib for software setup. Couple of questions. Can anyone confirm the OID for upsOutputVoltage. After mib import, my thirdparty package is using 1.3.6.1.4.1.232.165.3.4.4.1.2[1] and the [1] in brackets looks a little odd. Also can anyone confirm the data type. I believe it should be 32bit unsigned as from the mib Syntax is shown as INTEGER (0..2147483647). This equates to a DWord (32 bit unsigned integer) in my third party software. Any help or suggestions would be appreciated.
1 REPLY 1
Brian Vo
Trusted Contributor

Re: AF401A & Power Monitoring

Hi,

Upgrade the HPMM FW to v2.1.2 for bug fixed in input and output SNMP data.

Find the FW here: http://h18004.www1.hp.com/products/servers/proliantstorage/power-protection/software/module/ups/index.html

Your OID is correct.
1.3.6.1.4.1.232.165.3.4.4.1.2.1 (phase A or single phase)
and 2 other OIDs for output voltage:
1.3.6.1.4.1.232.165.3.4.4.1.2.2 (phase B)
1.3.6.1.4.1.232.165.3.4.4.1.2.3 (phase C)

Brian