Baying 10000 & 10000G2 racks

[Mike Povall]

I have a 10642 rack installed and want to add a 10642 G2 rack to it. I know that I will need a baying kit to bolt the two racks together but my question is will the side panel from the original rack fit on the G2 rack or am I going to have to buy a set of G2 side panels?

Thanks in advance.

[goldboy · Accepted solution]

Mike,
THe G2 rack siding is diffrent then the G1, the G2 siding is 3 paneles for each side.

We tried to mount the 1 panel from the G1 but it did not fit, the key/latch system is diffrent in the G2.

I was not impressed from the 3 panels system, they bent quickly.


sorry....

Tal

[Mike Povall]

Solution provided by Tal