HPE Community
Servers - General
1753554 Members
4345 Online
108795 Solutions
New Discussion юеВ

Re: Bypass switch on a PowerTrust UPS

 
Andrew Kaplan
Super Advisor

тАО02-16-2010 06:02 AM

тАО02-16-2010 06:02 AM

Bypass switch on a PowerTrust UPS

Hi there --

One of our systems, an L2000 class server, went down over the weekend due to an apparent failure of the PowerTrust UPS to which it is connected along with several of its components. These include an FC60 disk array, four SC10 disk enclosures, a DAT drive, and also a DLT library.

The switch of the UPS is currently set to NORMAL. If it was changed to BYPASS, would that enable us to safely power up the server and its components until the replacement part arrives onsite? Thanks.
A Journey In The Quest Of Knowledge
0 Kudos
Reply
3 REPLIES 3
Steven E. Protter
Exalted Contributor

тАО02-16-2010 06:21 AM

тАО02-16-2010 06:21 AM

Re: Bypass switch on a PowerTrust UPS

Shalom,

Yes.

If the UPS is working at all, you can safely run the system in bypass mode. If there is a power problem in this mode the chance of equipment damage is higher.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
0 Kudos
Reply
Torsten.
Acclaimed Contributor

тАО02-16-2010 09:20 AM

тАО02-16-2010 09:20 AM

Re: Bypass switch on a PowerTrust UPS

You did not say what model you have - powertrust is a family.

However, in bypass mode you simply bypass the UPS.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
TarunJain
Respected Contributor

тАО02-17-2010 01:50 AM

тАО02-17-2010 01:50 AM

Re: Bypass switch on a PowerTrust UPS

Hi Andrew,
Bypassing UPS is not safe.
However it may be the only option you got if any standby UPS is not available.
If the datacenter power is reliable then you can take your chances

I am an HPE Employee

Accept or Kudo
src="/html/assets/hpe_banner_SME_signature.p ng">

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.