Servers - General

Can ilo4 work without CPU and memory?

 
IC-online
Occasional Contributor

Can ilo4 work without CPU and memory?

It seems that ML30 gen9 server is not working, and it can't be seen in the route. Web doesn't work either, and ilo3 used by my other server can work without CPU and memory.

1 REPLY 1
Sebasbin
HPE Pro

Re: Can ilo4 work without CPU and memory?


Hi,

Kindly refer below document and make sure the ILO configured correctly

https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00020272en_us

Perform the server power drain and verify 

You can update the server BIOS and ILO firmware to the latest and check 

If issue persist, log a support case with HPE for further investigation 


Note: While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the company

Accept or Kudo