DL360 G9 Embedded Flash/SD-CARD: Restarted. Server power removed.

[avenonet]

Thanks in advance for reading my post and helping

we have five of these and all of them are on the latest firmware from P26940_001_spp-2020.03.0-SPP2020030.2020-0319.22

this is a ceph cluster, and it will run fine for months then just randomly this happens and it shuts down several nodes at a time basically wrecking complete havock on the storage environment.  we are running the operating system on USB3 128GB drives to preserve space for the cluster, do you know of any reasons why this is happening?  the server completely shuts down until manual intervention (starting) server via ilo

is there such a thing as too much load on the USB Drives?  I am completely floored that a server this relatively new with excellent hardware health would do this

Product Name ProLiant DL360 Gen9 UUID 32353537-38xxxxx Server Serial Number Mxxxxxx Product ID 755258-B21 System ROM P89 v2.76 (10/21/2019) System ROM Date 10/21/2019 Backup System ROM 06/02/2016 Integrated Remote Console   License Type iLO Advanced iLO Firmware Version 2.73 Feb 11 2020 IPv4 Address 10.10.19.41 Link-Local IPv6 Address FE80xxxxxx iLO Hostname SN1CRMxxxxxx

2765   06/27/2020 18:18 06/27/2020 18:18 1 Power-On signal sent to host server by: administrator. 2764   06/27/2020 18:18 06/27/2020 18:18 1 Browser login: administrator  2763   06/27/2020 13:02 06/27/2020 13:02 1 Server power removed. 2762   06/27/2020 13:02 06/27/2020 13:02 1 Embedded Flash/SD-CARD: Restarted. 2761   06/27/2020 13:02 06/27/2020 13:02 1 Server reset.

[avenonet]

it appears that the ceph operating system is recommeded to be on a seperate drive, however I still dont see how that would warrant a server shutting down on its own completely

[avenonet]

can someone that works for HPE please read this and help me with an answer on it

[vijay9]

Hi, 

Please follow the customer advisory https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c04996097

I would suggest you to check the ILO4 firmware version has been updated to the latest, if not please update to the latest. 

And if still same issue,  tty reseting the ILO to default and check, 

If still have any issue, reffer the above advisory and perform the steps. 

Regards, 

Vijay 

[avenonet]

thank you!