Community
Servers - General

Disabling the audio alarm on a PowerTrust UPS

 
Andrew Kaplan
Super Advisor

‎03-10-2010 08:48 AM

‎03-10-2010 08:48 AM

Disabling the audio alarm on a PowerTrust UPS

Hi there --

One of our servers has a PowerTrust UPS that has a problem with its batteries and/or its internal electronics. The original problem had to do with the unit not having any power coming from it, and no LED lights to indicate the root cause.

The initial solution was to switch the unit from normal to bypass mode, and the server was successfully powered on.

The UPS is not generating an audio alarm with all LED lights blinking. I need to disable the audio alarm, but I am not familiar with how to do it. Can someone provide information on this? Thanks.
A Journey In The Quest Of Knowledge
0 Kudos
Reply
2 REPLIES 2
Torsten.
Acclaimed Contributor

‎03-10-2010 08:51 AM

‎03-10-2010 08:51 AM

Re: Disabling the audio alarm on a PowerTrust UPS

"PowerTrust" is the name of the former HP UPS family - what model?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
Andrew Kaplan
Super Advisor

‎03-10-2010 09:49 AM

‎03-10-2010 09:49 AM

Re: Disabling the audio alarm on a PowerTrust UPS

Hi there --

The model number is A2998A, and it is attached to an L2000 class server.
A Journey In The Quest Of Knowledge
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.