cancel
Showing results for 
Search instead for 
Did you mean: 

ES80/47

 
Robert Brothers
Frequent Advisor

ES80/47

I have 3 drawers and pulled one out and I am trying to clear the configuration on it to create a standalone box and I keep getting a DB sync error? How does one reset if you will an ES47 to a standalone box. I have the id set to 0 on the front..
1 REPLY 1
Rob Leadbeater
Honored Contributor

Re: ES80/47

Hi Rob,

I think you'll need to use the "set membership" command from the MBM> console.

I'm not sure of the exact syntax, but if you take a look at the ES47/ES80 upgrade manual here:

http://h18002.www1.hp.com/alphaserver/download/ek-es470-up-c01-web.pdf

and the CLI reference:

http://h18002.www1.hp.com/alphaserver/download/cli_reference_v3.pdf

you should get some hints.

MBM> set memberhip -auto

looks like it might be a good place to start...

Cheers,

Rob