HP DL160 G10

 
eshur
New Member

HP DL160 G10

Устанавливаю debian10 netinstall:

При установке сетевой картой не выполняется получение ip-адреса по dhcp. Наверное, потому, что на сетевой карте 1Gbit, а на свиче 100Mbit. Прошу помочь.

 

На том же сервере собал RAID5 на 2,7 Тб как Embedded Storage HPE Smart array s100i SR GEN10 Log vol, но Debain10 виидт только 4 диска по 1 Tb и не видит RAID5.Также прошу помочь.

 

--

С уважением,

Евгений Журавель

Google Translated

Installing debian10 netinstall:

When installing, the network card does not receive an IP address via dhcp. Probably because the network card is 1Gbit, and the switch is 100Mbit. Please help.

 

On the same server, I have built a 2.7 TB RAID5 as an Embedded Storage HPE Smart array s100i SR GEN10 Log vol, but Debain10 sees only 4 1 TB disks and does not see RAID5. Also, please help.

 

-

Yours faithfully,

Evgeny Zhuravel

1 REPLY 1
SanjeevGoyal
HPE Pro

Re: HP DL160 G10

Hello,

When installing, the network card does not receive an IP address via dhcp. Probably because the network card is 1Gbit, and the switch is 100Mbit.

Connect the server with the 1Gbit supported network switch.

On the same server, I have built a 2.7 TB RAID5 as an Embedded Storage HPE Smart array s100i SR GEN10 Log vol, but Debain10 sees only 4 1 TB disks and does not see RAID5. Also, please help.

Debain not supported with this server, you can see the RAID information in SSA after reboot the server and press F9.

If you feel this was helpful please click the KUDOS! thumb below!   

Regards,


I am a HPE Employee

Accept or Kudo