Servers - General

HP DL160 g6 POST code 627

 
Viktorius33
Occasional Visitor

HP DL160 g6 POST code 627

      Hello everyone! There is a server that started loading with the post code "627 invalid or unknown sku chassis id". BIOS and BMC firmware are the latest. I have been fighting with it for 4 days, I cleaned all the contacts, installed the firmware again. When flashing BMC, after rebooting during initialization, it issues "waiting for BMC initialization ..........timeout". Please help me solve the problem.

Status of BMC - Working, BMC Firmware Revision - 04.26, BMC/IPMI FW date - May/08/2013, BMC SDR Version:2.18.1.35, Warehouse build number - 35.

System BIOS: Product Name - Proliant DL160 G6, BIOS - 033, Build date - 07/01/2013, ROM ID - 18DIM245

 

3 REPLIES 3
Anu_K
HPE Pro

Re: HP DL160 g6 POST code 627

Hello,

I found an advisory related to the same issue(https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c02757955) however looks like you are already running on the recommended BIOS version as indicated in the advisory.

I found a similar error reported in another discussion thread : https://community.hpe.com/t5/ProLiant-Servers-ML-DL-SL/DL160G6-error-627-during-boot/td-p/6962142#.YLhVvPkzaMo

Hope it helps!

 

Note: "While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the company."

I am an HPE Employee

Accept or Kudo

Viktorius33
Occasional Visitor

Re: HP DL160 g6 POST code 627

Thx, but i try all, and i did not have ilo100
Sebasbin
HPE Pro

Re: HP DL160 g6 POST code 627

Hi ,

You can check after clearing CMOS --Refer document https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=emr_na-c01728029 Page 121

If issue persist ,its may be the Lights-out management controller is faulty and you need to replace the same 


I am an HPE Employee

Accept or Kudo