Servers - General
cancel
Showing results for 
Search instead for 
Did you mean: 

HP IP Console Switch G2 2x1Ex16 Console cyclic reboot

 
Oleg_Suhanov
Occasional Visitor

HP IP Console Switch G2 2x1Ex16 Console cyclic reboot

Console: HP IP Console Switch G2 2x1Ex16 Console

Firmware 1.10.9.18433

 

When we start up the console, it attemts to start up, then in debug appears message "watchdog reset occured" and it reboots.

Boot log:

DsmibGetLocalPortTable no table entry at index 0
DsmibGetLocalPortTable no table entry at index 0
DsmibGetLocalPortTable no table entry at index 0
DsmibGetLocalPortTable no table entry at index 0
DsmibGetLocalPortTable no table entry at index 0
DsmibGetLocalPortTable no table entry at index 0
DsmibGetLocalPortTable no table entry at index 0
DsmibGetLocalPortTable no table entry at index 0
ipConfigGet ipStatus = 10x
LanParmsInit(DHCPv4): IP: ::, Mask: ::, GW: ::
--------> ipStatus : 10:6:0
LanIpstatus = 1: 10: 1
ERROR: Could not open exit macro file
vidFpgaSetNoiseCompensation: need to run setNoise for all active sessions???
MibInit done
ipConfigGet ipStatus = 10x
ReadSpcGlobalsFromFlash: no file named spcglobal
DsmibGetSessionPreemptionTimeout returns 0
rcmSendApplianceSettingMsg: setting= 1, value 00, len 1
rcmSendApplianceSettingMsg: setting= 14, value 00, len 1
rcmSendApplianceSettingMsg: setting= 15, value 00, len 1
rcmSendApplianceSettingMsg: setting= 16, value 01, len 1
rcmSendApplianceSettingMsg: setting= 17, value 00, len 1
Sent 5 settings to main board during initialization
*** Exit Macro transfer to main board started ***
ipConfigGet ipStatus = 10x
DsmibInitNetworkParms....
bootp1,dhcp1,dhcpc2: 2,1,1, ipmode1=06, ipmode2=00, dnsmode= 01
dsOverrideUserUpgrade Override file already exist, update MIB...
Waiting at FIFO for PPP online
TCP_Listen() ADDR_ANY
ASMP TCP Server listening at ::/3211 (v6)...
ADSAP2_initialize_globals
apcpConnectServer
ADSAP2_initialize_list
/etc/dsview_cert file not found
/etc/appliance_cert file not found
/etc/appliance_key file not found
TCP_Listen() ADDR_ANY
TCP_Listen() ADDR_ANY
APCP TCP Server listening at ::/2068 (v6)...
Waiting for APCP connection...
ADSAP2 TCP Server listening at ::/3871 (v6)...
DsmibGetSessionPreemptionTimeout returns 0
Waiting for ADSAP2 connection...
flash_update: finished SNMP
webserverWatchdogThread started ...
<181>mini_httpd(1458): [main] AEWS/1.0 starting on 127.0.0.1, port 2828
<181>mini_httpd(1468): [main] AEWS/1.0 starting on ::, port 443
<181>mini_httpd(1476): [main] AEWS/1.0 starting on ::, port 80
snmpThread() SNMP ENABLED

Watchdog reset occurred.

 

OWBI and UI can not be accessed.

Is there any way to solve this problem? Maybe try to upgrade the firmware, but without using UI/OWBI?

 

 

P.S. This thread has been moevd from ProLiant Servers (ML,DL,SL) to Servers > general. - Hp Forum Moderator