Servers - General
cancel
Showing results for 
Search instead for 
Did you mean: 

HP Management modul for UPS displays no events

 
lgieske
Occasional Contributor

HP Management modul for UPS displays no events

Hi,
i´ve to configure some management moduls for the R3000 XR.

If i launch the event notifications menu, it displays no events to select. Email setup works fine.

The events menu is empty, only the header with the checkboxes for email and SNMP traps are available.

How can i select the events???

Regards
1 REPLY 1
Brian Vo
Trusted Contributor

Re: HP Management modul for UPS displays no events

Hi,

-Firstly, try with different internet browser.
-Secondly, if still have the same problem. Reset the module (reset button on the card, it wouln't affect to the UPS operation).
-If still not working, serial connect to open its configuration menu (via Hyperterminal 115200,8,N,1,N). Set it to factory default.
-Lastly, if still not working, reflash or upgrade the Module's FW.

The Event Menu is a setup menu, shouldn't have any function to hold it up from display.

Brian