Servers - General
cancel
Showing results for 
Search instead for 
Did you mean: 

HP Proliant DL380 G6 hard drive driver

 
Gerry4
Occasional Visitor

HP Proliant DL380 G6 hard drive driver

Hello All.

My clients server hard drive had crashed and i am replacing the hard drive.

I am struggling to find the driver so windows 2012 server can detect the hard drive.

When you get to the point when windows wants to partition your drive, there is nothing there and it asked me to browse and install the driver.

I am using the front bays for the hard drive.

 

Regards

Gerald

1 REPLY 1
Highlighted
sudhirsingh
HPE Pro

Re: HP Proliant DL380 G6 hard drive driver

Hello Gerry,

Good day,

I suppose there is a HP Smart Array P410i controller in the server (which comes default in this model),

Please download windows 2012 driver from below link:

* RECOMMENDED * HP ProLiant Smart Array SAS/SATA Controller Driver for Windows Server 2012 x64 Edition

https://support.hpe.com/hpsc/swd/public/detail?sp4ts.oid=3883933&swItemId=MTX_88fc4cead4ee433cb69e5e2afb&swEnvOid=4184#tab3

You can extract and keep the files into a pen drive and use during windows installation.

Steps:

  1. Boot the system and begin Windows 2012 R2 installation from CD or from ISO connected via remote console on the iLO.
  2. Click the Install Windows.
  3. Custom Installation.
  4. Storage window – choose Have Disk.  Make sure USB is plugged in on the server.
  5. Choose the HP driver.
  6. Click next and the installation should continue.

Regards,

Sudhir

If this helps you with your issue, please click the thumb to register a Kudo.
If it resolves the issue, please consider marking it as an Accepted Solution.

I work for HPE
Accept or Kudo