HP Proliant ML 310e Gen8v2 E3-1240v3 with B120i Raid controller

[maximPa]

Hello,
I have owned the ML310 server in question for some years. I replaced the hd and together with the hd I also bought the Windows 2012 R2 since I had Windows 2008. The server has 2 hd not in raid, they are configured as 2 independent logical units. The problem is that when I start the installation of the new OS the disks are not seen, I suppose it's a driver problem but I don't know how to proceed. Has anyone had the same problem? Anyone who can kindly give me some advice?

Thanks and sorry for the bad English, but I use google translator.

[maximPa]

I was able to install the OS using this:

https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_a2b2caf8066e4a8b82a966d628&swEnvOid=4168#tab1

but on reboot it gives me this error:

" Could not find microsoft software license terms. Verify that the installation sources are valid and restart the installation. "

Any idea?

[I_AN]

Hello maximPa,

Greetings for the Day!!!

Please refer the below advisory: 

https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=c03928315

Regards,