Servers - General

HP StorageWorks LTO-5 Ultrium 3000 SAS Tape Drive

 
sirbuxdream
Advisor

HP StorageWorks LTO-5 Ultrium 3000 SAS Tape Drive

Dear Experts 

How to configure HP LTO-5 Ultrium 3000 SAS Tape drive in DL360P Gen8 OS linux 

Thank you

2 REPLIES 2
SanjeevGoyal
HPE Pro

Re: HP StorageWorks LTO-5 Ultrium 3000 SAS Tape Drive

Hello,

These backup programs are already on your system.

Your LTO drive is most likely /dev/st0
The tape drive should appear as device nodes /dev/st0 and /dev/nst0.
If it doesn’t, try loading the st kernel module. This is assuming that the HBA and drive are detected — lsscsi will tell you whether that’s the case.

I hope the below documents will help you.

HPE StoreEver LTO-5 Ultrium 3000 SAS Tape Drive - Installation

https://support.hpe.com/hpesc/public/docDisplay?docId=c05156494&docLocale=en_US

 HPE StoreEver LTO-5 Ultrium 3000 SAS Tape Drive - Troubleshooting

https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c05157342

HPE StoreEver LTO Ultrium Tape Drives - Document List

https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=c05038207

If you feel this was helpful please click the KUDOS! thumb below!   

Regards,

 


I am a HPE Employee

Accept or Kudo

SanjeevGoyal
HPE Pro

Re: HP StorageWorks LTO-5 Ultrium 3000 SAS Tape Drive

Hello,

Please let me know if you have any queries.

If you feel this was helpful please click the KUDOS! thumb below!   

Regards,


I am a HPE Employee

Accept or Kudo