HPE ProLiant MicroServer Gen 10 Will not boot without a monitor plugged in

[J_Rad]

---

I have a Gen 10 MicroServer that will not boot unless there is a monitor attached.

If a monitor is attached the system has as normal.

I can not find much apart from a reddit post but no answer there either.

[Anu_K]

Hello J_Rad,

Unfortunately I did not find any advisory related to same issue that you are facing however, you could refer to the Microserver Gen10 Troubleshooting guide and refer to 'video issues' section to see if the suggested action plan fixes the issue.

Link: https://support.hpe.com/hpesc/public/docDisplay?docId=c05357220 (Pg.51 onwards)

Hope it helps!

Note: "While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the company."

[J_Rad]

Hi Anu_K,

Apologies, I should have said, I have already gone through the trouble shooter and couldn't find anything that was applicable.

Thanks.

[Sebasbin]

Hi,

I would suggest to update the server BIOS to the latest version and check

https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_d15fc35361cd4b3d9970cac995#tab-history

If same issue , log a support case with HPE for further investigation .

[J_Rad]

Thanks Sebasbin,

Unfortunately I am already running that version