Servers - General

HPE Smart Array P824i-p Controller - Configuration

 
SOLVED
Go to solution
ousundergound
Occasional Contributor

HPE Smart Array P824i-p Controller - Configuration

Hello
I am currently working on an HPE DL380 G10 server with the P824i-p controller
I would like to use the HPE MR storage administrator tools. to be able to configure the controller, but I can't find a way to download it or launch it via SPP
Is there a person among you who has already used it to guide me?

2 REPLIES 2
AmRa
HPE Pro
Solution

Re: HPE Smart Array P824i-p Controller - Configuration

HPE Smart Array P824i-p Controller - Configuration

 

https://support.hpe.com/hpesc/public/docDisplay?docId=a00053621en_us&docLocale=en_US

Array and controller configuration

During the initial provisioning of the server, user must configure the controller using the smart array configuration utility in UEFI system utiilities.

After the initial provisioning of the server, user can use any of the following options to configure the arrays and controllers:

·         UEFI system utilities.

·         HPE MR storage administrator.

·         StorCLI.

HPE MR Storage administrator and StorCLI are available in the Service Pack for Proliant (SPP).

HPE MegaRAID Storage Administrator (HPE MRSA) for Windows 64-bit

 https://internal.support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_658b7070bb354bcc90dba08e64#tab1

 

HPE MegaRAID Storage Administrator StorCLI for Windows 64-bit

 

https://internal.support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_324f5f9946bd49479a1bb405ee

I am an HPE Employee

Accept or Kudo
ousundergound
Occasional Contributor

Re: HPE Smart Array P824i-p Controller - Configuration

Hi
thank you for sharing with me the direct download link, this will facilitate my progress I pass the topic in resolved mode